Sidebar
power_settings
This is an old revision of the document!
Below are power settings for common materials.
1/8 in (3 mm) Cast Acrylic
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/4 in (6 mm) Cast Acrylic
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/8 in (3 mm) Plywood
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
1/4 in (6 mm) Plywood
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Glass
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Engrave) |
Powder Coating
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Leather
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Granite
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Marble
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Melamine
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Rubber Stamps
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Cork
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
Corian
| 60 | 80 | 100 | 120 | |
|---|---|---|---|---|
| Power (Cut/Engrave) | 100/ | 100/ | 100/ | 100/ |
| Speed (Cut/Engrave) |
power_settings.1610875150.txt.gz · Last modified: 2021/01/17 03:19 by admin
