X700 Lasers

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Below are power settings for common materials.

  * 1/8 in (3 mm) Cast Acrylic
  * 1/4 in (6 mm) Cast Acrylic
  * 1/8 in (3 mm) Plywood
  * 1/4 in (6 mm) Plywood
  * Glass
  * Powder Coating
  * Leather
  * Granite
  * Marble
  * Melamine
  * Rubber Stamps
  * Cork
  * Corian

----

**1/8 in (3 mm) Cast Acrylic**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 70/70 | 55/55 | / | / |
^ Speed (Cut/Engrave)   | 17/300 | 17/300 |      |      |


**1/4 in (6 mm) Cast Acrylic**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 70/70 | 55/55 | / | / |
^ Speed (Cut/Engrave)   | 12/300 | 12/300 |      |      |

**1/8 in (3 mm) Plywood**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |


**1/4 in (6 mm) Plywood**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Glass**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Engrave)   |      |      |      |      |

**Powder Coating**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Leather**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Granite**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Marble**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Melamine**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Rubber Stamps**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Cork**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Corian**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |
X700 Lasers

User Tools

Site Tools

Page Tools
