User Tools

Site Tools


quick_start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
quick_start [2020/10/01 22:18]
admin [Software Setup]
quick_start [2020/12/30 21:53] (current)
admin [Preparation]
Line 9: Line 9:
   * You should get about 5 gallons of distilled water.  Not purified water, not spring water, not mineral water, but distilled water.  This will be used for cooling your laser tube.   * You should get about 5 gallons of distilled water.  Not purified water, not spring water, not mineral water, but distilled water.  This will be used for cooling your laser tube.
   * If your laser didn't come with a chiller and you didn't purchase one separately, get two empty gallon jugs, fill them 3/4 full with water and freeze them.   * If your laser didn't come with a chiller and you didn't purchase one separately, get two empty gallon jugs, fill them 3/4 full with water and freeze them.
-  * Consider ordering eye protection of you don't have it.+  * Consider ordering eye protection if you don't have it.
   * Buy or acquire some material for your first projects.  Cardboard, paper, cast acrylic, and plywood are good options.   * Buy or acquire some material for your first projects.  Cardboard, paper, cast acrylic, and plywood are good options.
    
quick_start.1601608702.txt.gz ยท Last modified: 2020/10/01 22:18 by admin