Below are power settings for common materials.

  * 1/8 in (3 mm) Cast Acrylic
  * 1/4 in (6 mm) Cast Acrylic
  * 1/8 in (3 mm) Plywood
  * 1/4 in (6 mm) Plywood
  * Glass
  * Powder Coating
  * Leather
  * Granite
  * Marble
  * Melamine
  * Rubber Stamps
  * Cork
  * Corian

----

**1/8 in (3 mm) Cast Acrylic**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 70/70 | 55/55 | / | / |
^ Speed (Cut/Engrave)   | 17/300 | 17/300 |      |      |


**1/4 in (6 mm) Cast Acrylic**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 70/70 | 55/55 | / | / |
^ Speed (Cut/Engrave)   | 12/300 | 12/300 |      |      |

**1/8 in (3 mm) Plywood**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |


**1/4 in (6 mm) Plywood**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Glass**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Engrave)   |      |      |      |      |

**Powder Coating**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Leather**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Granite**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Marble**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Melamine**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Rubber Stamps**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Cork**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |

**Corian**
|                       ^ 60   ^ 80   ^ 100  ^ 120  ^
^ Power (Cut/Engrave)   | 100/ | 100/ | 100/ | 100/ |
^ Speed (Cut/Engrave)   |      |      |      |      |